SP200EL – Electric rod pump
Duun SP200 EL rod pump is supplied in 3 depth options with a reservoir depth of up to 4.2 metres.
It is powered by an 18 kW electric motor and is supplied as 230V or 400V. The pump is delivered complete with a control cabinet with frequency converter. This means that the pump regulates the speed even according to what it is set to draw power from and will work optimally at any time depending on the slurry consistency and the power source. An electrician must connect the power to the fuse box and run the cable between the pump and the control box. Electric motors are supplied with a heating element as standard, which can be connected if necessary. For example if the engine is in a humid climate.
The pump is supplied as standard without an attachment and this must be ordered as an extra. The attachments can be fixed in the shaft, over the edge of the slurry tanker or three-point linkage to the tractor for easy transfer of the pump. There are also brackets that are bolted to the edge of the slurry tanker, where the tractor attachment can be attached.
The pump can be delivered with radio-controlled start/stop of the electric motor.
Power requirement 18 kW. 63A 230V, 40A 400V.
Manual loading tube Ø160 mm.
Load capacity 6,400 l/min at full slurry tanker.
Stirring capacity 12,000 l/min.
The large diameter of the loading tube gives a large quantity and low pressure with less foam formation.
Galvanized steel and plastic provide a long service life.