VM100
Document overview
Saw
| Document no. | Description | From serial no. | To serial no. | ||
|---|---|---|---|---|---|
| 4111-S003 | Saw motor loses power | 05001 | Download | ||
| - | Saw does not go down far enough during cutting | 05001 | |||
| 4111-S004 | Adjusting the angle of the sword | 05001 | Download | ||
| 4111-S011 | Slack between cutting handle and saw bar | 05001 | Download |
Splitter
| Document no. | Description | From serial no. | To serial no. | ||
|---|---|---|---|---|---|
| 4111-S006 | Splitting piston returns slowly | 05001 | Download | ||
| 4111-S007 | Splitter piston does not return | 05001 | Download | ||
| 4111-S008 | Splitter does not start | 05001 | Download | ||
| - | Splitter runs continuously | 05001 | |||
| - | Splitting piston advances | 05001 | |||
| 4111-S001 | The splitter does not regulate between power and fast speed | 05001 | Download | ||
| 4111-S005 | When cutting, the starting time of the splitting cycle is unfavorable | 05001 | Download | ||
| - | The splitting piston moves forward uncontrollably during use | 05001 | |||
| - | The fission cycle does not start | 05001 |
Cooling fan
| Document no. | Description | From serial no. | To serial no. | ||
|---|---|---|---|---|---|
| 4111-S009 | Belt for fan operation must be replaced | 05001 | Download |
Log stop
| Document no. | Description | From serial no. | To serial no. | ||
|---|---|---|---|---|---|
| 4111-S010 | Log stop stop does not return | 05001 | Download |
Operation
| Document no. | Description | From serial no. | To serial no. | ||
|---|---|---|---|---|---|
| 4111-S002 | The handle for operating the bar movement is loose and sloppy | 05001 | 06018 | Download |