Mulchers rear mounted

The mulchers are constructed of high-strength steel grades which ensure that they can withstand the stresses they are subjected to over time. This applies to both hull, roller and rotor. The blade attachments are made of 16mm toughened material with a profile that provides collision protection and helps to prevent them from deforming. The hull is designed so that the cavity between knives and hull is expanding from the entrance.  Rocks and foreign matter that are picked up and passed through the blades will emerge without damaging the mulcher.

The mulchers come standard with counter knives which allow for the chopping of long objects like twigs etc.

The mulchers has a strong belt drive with quality belts that can withstand heavy loads. The BP220 has four belts and comes as 540 rpm. The BP280 and BP300 have five belts and by swapping the belt wheels one can rotate from 540 rpm to 1000 rpm.

The mulchers has three point with hydraulic side displacement of 50 cm. The three point frame has flow grooves in the attachment ears for arms and top stays and this, together with the roller, ensures that the mulcher follows the terrain well.





BP220 BP280 BP300
Working width (mm) 2200 2800 3000
Transport width (mm) 2400 3000 3200
Side offset (mm) 500 500 500
Rotor speed pto 540 rpm 2053 1943 1943
Rotor speed pto 1000 rpm 1850 1850
Required power kW / hp 37/50 52/70 60/80
Maximum power kW / hp 540rpm 66/90 104/140 104/140
Maximum power kW / hp 1000rpm 133/180 133/180
Freewheel Standard built in gearbox
Rotor drive SPX belts 4 4 5
Rotor outer diameter (mm) 41,5 44 44
Rotor diameter x thickness (mm) 168,7×8 193,7×8 193,7×8
Speed of beats (m / s) pto 540/1000 45 43 43
Number of hammer knives 18 24 26
Roll diameter (mm) 193,7×5 219,1×5 219,1×5
Belt Tightening Mechanical
Weight 700 920 975



12710062Calibrating rail (BP220)
12711016Calibrating rail (BP280)
12712059Calibrating rail (BP300)