Mulchers side mounted

The mulchers are constructed of high-strength steel grades which ensure that they can withstand the stresses they are subjected to over time. This applies to both hull, roller and rotor. The blade attachments are made of 16mm toughened material with a profile that provides collision protection and helps to prevent them from deforming. The hull is designed so that the cavity between knives and hull is expanding from the entrance.  Rocks and foreign matter that are picked up and passed through the blades will emerge without damaging the mulcher.

The mulchers come standard with counter knives which allow for the chopping of long objects like twigs etc.

BPA180 and BPA220 have powerful belt drive with 4 quality belts that can withstand heavy loads.

Side mounted mulchers  can be displaced 1.8 meters laterally and can be placed 60 degrees downwards and 90 degrees upwards.

 

 

 

 

Spesifikasjoner

BPA180 BPA220
Working width (mm) 1800 2200
Height (mm) 1160, 1160,
Total width (mm) 2341 2741
Side offset (mm) 1810 1810
Length (mm 2122, 2122,
Weight kg 780 840
Weight pto shaft wide angle both sides kg 42 42
Rotor speed pto 540 rpm 2053 1943
Required power kW / hp 40/54 40/54
Minimum tractor weight kg 3200 3500
Freewheel Built-in gearbox
Rotor drive SPX belts 4 4
Rotor outer diameter (mm) 41,5 41,5
Rotor diameter x thickness (mm) 168,7×8 168,7×8
Speed of beats (m / s) pto 540 45 45
Number of hammer knives 16 18
Roll diameter (mm) 193,7×5 193,7×5
Belt Tightening Mechanical

Accessories

127209007Protection Chain BPA220
127219007Protection Chain BPA180

Downloads